Rokonet Orbit-6 Manual de usuario descargar pdf (Pagina 20)

User Manual

BYPASSING A ZONE

STEP DESCRIPTION

Check the READY LED on your

keypad. If NOT lit or flashing, the

system has at least one faulted intrusion

zone identified by noting which LED(s)

are flashing in the keypad's ZONES

area, shown at the left.

Code

Bypassing

To bypass such a zone(s) and cause it to be ignored by the

system, enter the following sequence correctly:

NOTE: If you make a mistake when entering your User

Code, the keypad will produce three short beeps. Re-enter

if necessary.

An additional zone(s) can be bypassed at the same time by

adding its number to the sequence. For example, to bypass

Zones 2 and 3, press:

[

] + [ 1 ] + [USER CODE] + [ 2 ] + [ 3 ]

The same sequence can “toggle” the bypass(es) during the

disarmed period so that they may be either applied or

removed.

Press # or Q to approve or wait 2 seconds (timeout period).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Rokonet Orbit-6 Manual de usuario Pagina 20