Rokonet Orbit-6 Manual de usuario descargar pdf (Pagina 9)

User Manual

9

Section 2: Your Keypad

VISUAL INDICATORS

The Orbit-6 can support 6 and 8 zone LED and

LCD keypads. Both of these keypads have the

same operating procedures. This section discusses

the keypad's visual indicators and the use of its

keys.

Each keypad in your

system reports its status

via its LED (lighted)

indicators at the right.

Through its keys, you can

enter commands to "arm"

and "disarm" the system,

bypass intrusion zones,

report emergencies,

silence an alarm in

progress–along with

several other useful

functions.

The four LED indicators found at the upper right

provide typical system indications, as discussed

below and on the next page. Some indicators have

additional functions, explained later on.

POWER LED

CONDITION

(see note at left)

EXPLANATION

ON

The system is operating properly

from commercial (AC) power; its

backup battery is in good

condition.

OFF

The system is inoperative due to

the lack of power (from both

commercial AC and backup

battery); servicing will be required.

FLASHING

(disarmed

state)

Indicates a trouble condition; for

more information on displaying and

attending to trouble conditions, see

pages 29 through 30.

The POWER LED is a

useful indicator reflecting

the system's operation.

NOTE: If a trouble

condition exists, the

POWER LED will flash

only when the system is

in its disarmed state.

Once the system is

armed, a previously

flashing POWER LED will

light steadily.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comentarios a estos manuales

Sin comentarios