Rokonet Orbit-6 Manual de usuario descargar pdf (Pagina 30)

User Manual

IDENTIFYING SYSTEM TROUBLES

STEP DESCRIPTION

Perform if the POWER LED is flashing. If lit steadily, there

are no system troubles. To view trouble conditions, the

system must be disarmed. Enter the User Functions Mode

by pressing [ ] and then select View Troubles (3):

The keypad will beep and its LEDs will light, reflecting the

information below. After several seconds, the display will

return to normal.

FLASHING: Trouble Detected

OFF:

(normal in this mode)

OFF:

(normal in this mode)

IF ON: Fire Zone Trouble

(contact your dealer)

IF ON: Low Battery (contact dealer)

IF ON: AC Power Loss (see Note 1)

IF ON: Clock, Time & Date Not Set

(see page 19)

IF ON: Communications Trouble

(see Note 2)

IF ON: Bell Loop Trouble

(see Note 3)

In an 8 zone keypad there are 2 more LEDs which are only zone indicators

and not system indicators.

NOTE 1: Check that the ORBIT-6's Plug-In Transformer has not been

removed from its outlet. If intact, check that a blown fuse, a switch, or a

tripped circuit breaker has not interrupted the circuit supplying power to

the transformer.

NOTE 2: The ORBIT-6 has failed in its attempts to report an alarm or

trouble condition to the Central Station. Check that your telephone line is

functioning. Check to see if your external bell has been tampered with. If the

problem still exists contact your dealer.

NOTE 3: The ORBIT-6 has failed in its attempt to identify the Bell Loop.

It is possible for more than one trouble to be present at the same time.

If so, multiple Zone LEDs will be lit simultaneously.

1 2 ... 25 26 27 28 29 30 31 32

Sin comentarios

Rokonet Orbit-6 Manual de usuario Pagina 30