Rokonet ORBiT-14 Manual de usuario descargar pdf (Pagina 4)

Installation and Programming Manual

Access Control Expansion Module (Not for UL Installations)

One of ORBIT-Pro's most unique features is its ability to interface with an on-premises Access Control sub-

system. With a maximum connection of eight such Access Control Modules–each supporting up to two readers–a

total of 16 readers is possible, each of which may operate with magnetic, proximity, bar code, touch, and/or

Weigand technology. Up to 500 users can be accommodated and up to 1200 "transactions" can be stored.

Scheduling

Through the use of the system's built-in clock, it's possible to schedule automatic arming and disarming (of one or

more partitions) at the same time on selected days of the week, or at a specific time within the subsequent 24-hour

period. Up to 20 vacation periods can be programmed.

Event Logging

By itself, the panel has the capability of storing up to 128 significant events, including arming, disarming, bypassing,

alarms, troubles, restorals, and resets. These events are logged in order according to date and time, and when

applicable, according to Zone, Partition, User Code, Keypad, etc. Optional Event Log Expansion Modules are

available to store 512 and 999 events, respectively. When appropriate, such events can be displayed on an LCD

Keypad or uploaded to the alarm company via the Upload/Download software and printed for further analysis.

Sensor Auto-Testing (Not for UL Installations)

Sensor Auto-Testing provides for the automatic testing of a selected group of up to 16 sensors in the installation at

one (or more) selected times during the day. If all the related sensors are triggered within a selected window of

time, the Auto-Test will be considered successful. The results of the test will be logged in the Event Log, and

reported to the Central Station, if so desired.

Printer Adapter Module (Not for UL Installations)

A printer module, designed to interface between the ORBIT-Pro’s 4-wire Expansion Bus and a Centronics-type

parallel printer, will allow for the printing of all significant system events, as they occur, including Access Control

activities (see above) if applicable. Each event will include the date, time, and if applicable, the affected partition

and the user involved.

Bus Adapter Cable (Not for UL Installations)

With the Bus Adapter Cable assembly, a portable IBM

-compatible computer may be directly connected to the

ORBIT-Pro and used for local Uploading/Downloading operations.

Program Transfer Module (Not for UL Installations)

The Program Transfer Module is a tiny printed circuit board capable of storing, without the need for power, the

programmed configuration of any ORBIT-Pro. Therefore, if desired, one account’s programmed configuration–once

loaded into the Program Transfer Module–can be used as a “template” and taken to another account, where the

stored configuration may be “copied” and subsequently modified.

1 2 3 4 5 6 7 8 9 ... 69 70

Sin comentarios

Rokonet ORBiT-14 Manual de usuario Pagina 4