Rokonet ORBiT-14 Manual de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
Installation and Programming Manual
58
ZONES: MAINTENANCE (cont’d)
Quick Key Item Explanation
MAINTENANCE
(cont’d)
§ the following material relates to the assignment of zone
attributes (e.g. Zone I.D., Partition, Type, Sound, etc.) to any
(NOVA) wireless detectors used in the system
§ the capability to receive data from wireless detectors requires
that the ORBIT-Pro be equipped with at least one Wireless Zone
Expander
§ wireless background information for the ORBIT-Pro is provided
in the instructions furnished with the Wireless Expansion Module
and the system’s individual transmitters
2 9 5 Wireless Zone
Allocation
Not for UL
Installations
§ allows for the “learning in” of data from the system’s wireless
transmitters; consult the individual transmitter’s instructions
§ from this display:
press [ENTER]
§ using either the UP- or DOWN-
arrow keys, position the cursor
and select the zone number
intended for the first wireless
transmitter
§ note that the first eight zones are
reserved for the hardwired zones
on the panel’s Main Board
§ press [ENTER]
§ at this display, pressing [ENTER]
allows skipping to the next
transmitter assignment
§ to write (or overwrite) data into the
selected location, press [ENTER]
§ to erase the data in the selected
location, press [ENTER]
2 9 5
xx
+
E
N
T
E
R
§ confirm your choice by pressing
[STAY] and [ENTER]
§ to chose supervision (YES/NO)
press [ENTER]
§ allows to perform communication
test between the transmitters and
the receiver.
§ to perform the test, press
[ENTER]
§ the first wireless assigned zone
will show. To proceed, initiate a
transmission from the selected
zone, and allow for a few seconds
for the receiver to react. The
result will show in “percentage” as
an indicator of the quality of the
communication.
2 9 6 Wireless
Communication Test
§ using either the UP or DOWN
arrow keys, select the zone
number for the next wireless
transmitter to be tested, if so
desired.
INSTALLER PROG:
2)SYSTEM
ZONE MAINTENANCE
5)WL ZONE ALLOC××
ZONE ALLOCAT:
ZONE#=09 (1:01)
ZONE=09 (ALLOC):
1) SKIP
ZONE=09 (ALLOC):
2) (RE)WRITE ××
ZONE=09 (ALLOC):
3) ERASE ××
ERASE LOCATION
ARE YOU SURE? N
ZONE=09 (ALLOC):
4) SUPERVISION
ZONE MAINTENANCE
06)WL COMM TEST××
COMMUN. QUALITY:
01)ZONE 09:100%
COMMUN. QUALITY:
02)ZONE 10:000% ××
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 69 70

Comentarios a estos manuales

Sin comentarios