Rokonet ORBiT-14 Manual de usuario descargar pdf (Pagina 68)

Installation and Programming Manual

68

UTILITY OUTPUT: CODE

Quick Key Utility Output Follows Default Explanation

4 CODE

--- § activates the designated Utility Output

whenever the system’s user does the following:

§ chooses the User Functions Mode and

selects ACTIVITIES/UTIL OUTPUT

§ after designating a Utility Output, the user

must enter his code

§ if approved for triggering the Utility Output,

the UO will function as programmed

§ as the installer, you must designate which of

the system’s User Code(s) will be capable of

triggering the selected UO

§ this function works as described ONLY if, in

Installer Programming, the Quick Utility Output

parameter under System Control is disabled

(see page 42)

§ also refer to the ORBIT-Pro’s User’s Manual for

clarification and additional information about

triggering Utility Output(s) via User Code(s)

§ proceed to PATTERN of OPERATION, on page

69.

00

-

98

(User) Codes for UO

--- § use the DOWN-arrow and/or UP-arrow keys to

select among the 99 available User Codes

§ at the desired code, use the [STAY] key

to toggle between “Y” or “N” to select (or not)

the number(s) [e.g. 00, 01, 02, etc],

corresponding to the particular user, chosen to

trip the designated Utility Output

§ when done, press [ENTER] to select the

desired PATTERN OF OPERATION, provided

on page 69.

INSTALLER PROG:

3) UO ↓↓

1 2 ... 63 64 65 66 67 68 69 70

Comentarios a estos manuales

Sin comentarios