Rokonet ORBiT-14 Manual de usuario descargar pdf (Pagina 45)

Installation and Programming Manual

SYSTEM: SYSTEM CONTROL

Quick Key Item Default Explanation

SYSTEM CONTROL (cont’d)

1 2 24 Arm Pre-Warning NO

if YES: for any partition(s) set up for Auto-Arming (refers to

the user’s Daily-Arm function; see the ORBIT-Pro

User’s Manual for additional details), an audible Exit

Delay (warning) countdown will commence

255 seconds prior to the automatic arming

§ during this period, Exit Delay beeps will be heard in

those keypads assigned to the partition(s) to be armed

and programmed for such annunciation

§ if a valid User Code is entered at any time during the

countdown, it will delay, by 45 minutes, the partition’s

automatic arming

§ if, after the partition has been “auto-armed”, it is

disarmed as described above, it can no longer be

automatically armed for the current day

§ the extended 255 seconds warning does not apply to

automatic STAY mode arming

if NO: Auto Arming for any partition(s) so programmed will

take place at the designated time

§ the programmed Exit Delay period and any audible

§ annunciation will occur as expected

1 2 25 Low Battery Arm YES

if YES: it will allow arming the system when a low battery

condition is detected (also in Power Supply expansion

module)

if NO: it will not allow arming the system when low battery is

detected

1 2 26 Eng. Tamper NO

if YES: after Tamper alarm, system will not be ready to arm

and TAMPER LED is not restored

if NO: after Tamper alarm, system will be ready

1 2 27 Blank Display NO

if YES: the display will show the message: “Enter code”. Only

Power, Tamper and Fire LEDs will operate as usual.

Entering a valid code will return the display to normal

operation. One minute after last operation on the

keypad, it will return automatically to “blank mode”

if NO: display will operate normally

1 3 SET CLOCK --- Sets the System’s DATE and TIME

1 3 1 System Date

JAN 1 1999

Allows the current DATE to be set (see page 30 for

instructions on using the keypad)

1 3 2 System Time 00:00 Allows the current TIME to be set using the 24-hour format

1 4 WINDOWING

---

Defines a Time Window and its Effective Days

Allows for the “Exception Reporting” of Opening/Closing

signals when the system is either disarmed or armed

outside of the specified time window

1 4 1 Window Start

H:00 M:00

Sets the window’s START time (in a 24-hour format)

1 4 2 Window Stop

H:00 M:00

Sets the window’s STOP time (in a 24-hour format)

1 4 3 Window Days ALL § sets the days of the week in which the window is

activated

§ use either the [↓↓] or [↑↑] keys to select among the days

of the week

§ use the [STAY] key to toggle between “Y” and “N” as to

whether the window should be active for the given day

§ the window and the days chosen here will also apply to

the automatic arming and disarming of the system if so

desired by the user (see the ORBIT-Pro User’s Manual

for details)

INSTALLER PROG:

1)SYSTEM ↓↓

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

Comentarios a estos manuales

Sin comentarios

Rokonet ORBiT-14 Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Rokonet ORBiT-14